PTJ Manufacturing Shop

PTJ Manufacturing Shop

How to know that aluminum profiles are inferior - PTJ Shop

How to know that aluminum profiles are inferior

The oxide film is thin. The national standard stipulates that the thickness of the oxide film of the building aluminum profile should be not less than 10um (micrometer). The thickness is not enough, and the surface of the aluminum profile is rust and corrosion. Some aluminum profiles without a name, site, production license and certificate have a thickness of only 2 to 4 um, and some even have no oxide film. According to experts' estimates, for every 1 um reduction in oxide film thickness, the cost per ton of profile can be reduced by more than 25 dollars.

How to know that aluminum profiles are inferior The chemical composition is unqualified. The aluminum profile with a large amount of miscellaneous aluminum and scrap aluminum can greatly reduce the cost, but it will lead to the unqualified chemical composition of the aluminum profile of the building, which seriously endangers the safety of the construction project.
 
   Reduce the wall thickness of the profile. 90 series sliding window type, according to national standards, the wall thickness of aluminum profiles is not less than 1.4mm, and some Guangdong products are only 0.6 to 0.7mm. 46 series of ground door type, the minimum thickness of the aluminum profile used by the national standard is not less than 1.62mm. In the sampling inspection, some products in Guangdong are only 0.97 to 1.18mm.
 
   Inferior aluminum profiles greatly reduce the sealing time, reduce the loss of chemical reagents, and reduce the cost, but the corrosion resistance of the profiles is also greatly reduced.


PTJ Machining Capabilities

Automatic Bar Machining capacity for parts from 1/16" to 2 5/8”
CNC Turning – CNC multi-axis machining centers for superior speed & flexibility
Custom Machining - expert machined components delivered on time
Multi Spindle Machining- Davenport, Euro turn, New Britain & Acme Gridley
Screw Machine Products – precision components from a broad variety of materials & Equipment
Swiss Machining – micro-parts to 1-1/4 round diameter providing speed, high capability including precision tolerances and specialized finishes
High Volume Machining – Specialized in machined parts exceeding 1,000 pieces up to millions of pieces for optimum efficiency
CNC Milling - Machining from bar stock, plate or block metal using up to 3 axis of motion
5 axis (11 axis) Machining – Multi Axis Multi spindle technology for completing complex parts efficiently in one operation. C=0 sampling plan & equipment versatility provide one stop shop capability for a variety of applications

What Can we help you do next?

∇ Get more information about cnc machining Shop

Case study-Find out what we have done.

→Ralated tips about cnc machining services


By |Categories: Blog|Tags: , cnc turning services, , , machining parts, ,faqs,technical news,company news,material news |Comments Off
PREVIOUS:Israel Toolings GB and Machine Director Corning arrives at PTJ Cnc Machining Factory
NEXT:Painting and piping requirements for non-standard parts castings - PTJ Shop

RELATED POSTS